For the duration of the hot summer days, the ice maker is our greatest buddy in the kitchen. But what if your ice maker abruptly stops producing any ice, what are you to do? Well, my buddy, you are in luck, simply because this short article will support you know the cause why and what are the important methods to perform in order to resolve the situation.
So, why is your ice maker not producing any ice?
1. Power connection
Before anything else, verify no matter if your machine is connected to the power outlet, if it is, check if the power outlet is functioning effectively and is transmitting electric present. Then turn on your ice maker to verify if it is okay or not. The wire along the proper side of the machine ought to be lowered as far as it goes. If this is in a raised position, your machine is off and it will not make any ice.
two. Right freezer temperature
If the icemaker wire is positioned correctly and is turned on, proceed to check the freezer temperature. The temperature should be inside the range of to 8 degrees Fahrenheit. If it really is above ten to 12 degrees, your machine will not produce ice.
For a newly installed icemaker, you will have to have up to 24 hours to let the machine function and cool down. A newly installed icemaker may possibly not function until the ice mold temperature has dropped to about 15F – 16F degrees. If you have just added a water line to the refrigerator, it could take up to about an hour and a half for the machine to start operating. Also, a newly installed water line might have air in the line. It can often take a few ice producing cycles to clear the line of air.
3. Verify water supply
Okay, in order to make ice, you need water. So make confident that there is water flowing to the ice maker. Verify for kinks in the tubing and appear out for frozen particles stuck inside the water tube. Also make confident that the household water provide is turned on. Occasionally the water inlet valve can go bad. If there is water in the ice maker, but it is not freezing, use a freezer thermometer to verify that the temperature is cold enough for it to freeze.
four. Check copper provide
Make positive the copper supply line to the refrigerator is turned on under the sink, or coming from the basement.
After checking all the above described things and specific that the freezer is cold sufficient but it is nonetheless not making any ice, check and feel the bottom of the ice maker unit. appliance repair Glenn Heights is ordinarily cold for an ice maker operating smoothly. But if it is hot or warm, it is achievable that the tiny heating element inside is stuck or broken. This heating element when turned on melts the bottom of the cubes so that they can be released and harvested by the ejector blades. In this case, you will have to replace this portion in order to make your ice maker operate smoothly once again.